Allied Telesyn International Corp TurboStack AT-S6 User's Guide download pdf (Page 54)

Management Menus

The main menu in Spanish then appears as follows:

The management agent “remembers” and retains the selected language

through a power failure. The language option in the Japanese version of

the management agent offers only English and Japanese (Kanji).

Update Selected

Node

This option allows you to send software from one hub to another.

If you select Send updated software to another hub from the

Administration menu, you are prompted to select an individual hub

node to download with new software:

Specify the node to be downloaded by entering one of the following

information:

❑ The hub’s IP address if the node has already been configured with

one

❑ The target hub’s name if one has been configured, or

❑ The hub’s MAC address

Update All Nodes Perform this download during times when the network is not busy. You

may need to repeat the procedure because not all hubs may receive the

download the ﬁrst time.

If you select Update software in all hubs from the

Administration menu, a message is broadcast to all other TurboStack

hubs, informing them about the download if they are not already running

the current software release (the software running on the hub from which

you issued this command). Hubs running older versions of the software

send back a request for the new version.

Centro Extensible AT-TS12TR de Allied Telesyn International: 4.0

Sunnyvale

Por favor seleccione una opcion:

Estado de puerto

Centro - estadistica

Modulo - estadistica

Generalidades de puerto

SEcurity/Source Address Table

Administracion

SAlida

Sunnyvale

Please specify the hub to be downloaded:

The Hub to be downloaded may be identified by name (‘hub name’),

by IP address (128.2.3.4), or by Ethernet address (0000F4 123456).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 77 78

No comments

Allied Telesyn International Corp TurboStack AT-S6 User's Guide Page 54