Allied Telesyn International Corp TurboStack AT-S6 User's Guide Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
Management Menus
16
At the top of the main menu is the product name and software version,
and immediately below is the user-assigned hub name, if any (Sunnyvale
in this example). The hub modules occupy the first six slots of a seven-slot
chassis, and have all been given names. A TurboStack Ethernet switch,
the AT-TS90TR, occupies the seventh slot. At the bottom of the screen is a
prompt (->), where the cursor is blinking, awaiting input.
The master module cannot manage the switch; that is, you cannot use the
Omega menus to name the switch. The master, however, can detect and
report the switch’s identity and displays the model number on the
screen.To manage the TurboStack switch, refer to your appropriate switch
manual.
In the lower part of the sample screen, the available modules are
displayed along with their respective names. The numbers correspond to
the module’s slot position within the chassis. The currently selected
module is always highlighted with an arrow (>), Accounting A in the
example. To select one of the modules, enter the module’s slot position. For
example, to select the Manufacturing module, enter 6.
The master module retains configurations you enter for specific module
numbers. If a new module replaces an old one in a given slot number, the
new module inherits the configurations associated with that slot. For
example, a new module installed in Slot 1 inherits the module name
Accounting A, along with other information associated with the old
Accounting A. The new Accounting A takes over the master functions.
In a standalone configuration (the hub is not installed in a department
concentrator chassis), Omega has a simplified main menu:
When following procedures in this manual to enter or select an option, you
must first type a number or character corresponding to your choice and
then press the Return or Enter key.
NOTE
Examples used throughout this chapter apply to 10Base-T TurboStack
hubs. Screen displays may vary according to the type of appliqué port your
hub is using. Check your appliqué manual for more details.
Allied Telesyn International AT-TS24TR Stackable Hub: 4.0
Sunnyvale
Please select an option:
Port status
Hub Statistics
Individual port overview
Security/Source Address Table
Administration
Quit
->
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Comments to this Manuals

No comments