Allied Telesyn International Corp AT-810SL User Manual download pdf (Page 29)

Your AT-810SL fanout requires minimal operator attention. For example,

when the Station Port is set to “Remote” mode of operation, access can be

through an AUI cable and transceiver to an Ethernet coaxial cable or ﬁber

optic cable.

Once installed and set for your conﬁguration, the AT-810SL will be

transparent to both users and the network in general.

Port Connectors

Transceiver Port connectors as well as the Station Port connector are located

on the back panel. This is shown in Figure 5.

Figure 5: Port/Station Connector(s)

Note

All AT-810SL screws and mounting hardware use International

Standard metric threads. Do not attempt to replace them with a

different type of threaded screw.

Transceiver Ports (x8)

AUI Cable Connections to 

DTE Workstations

Station Ports (x1)

AUI Cable Connections to 

MAU Transceiver on coax

OFF

ON

LOCAL REMOTE

PORT 1

PORT 2

PORT 3

PORT 4

PORT 5

PORT 6

PORT 7

PORT 8

POWER

SYSTEM

POWER

STATION

SQE TEST

SWITCH

LOCAL/REMOTE

SWITCH

CentreCOM

810SL



IEEE 802.3/ETHERNET

MULTIPORT

TRANSCEIVER FANOUT

Chapter 3

Operation

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments

Allied Telesyn International Corp AT-810SL User Manual Page 29

Comments to this Manuals

Related products and manuals for Networking Allied Telesyn International Corp AT-810SL