Allied Telesyn International Corp AT-810SL User Manual download pdf (Page 30)

Operation

Figure 6 details the rear panel.

Figure 6: Rear Panel Switches

SQE Test Switch

Located on the back panel as shown in Figure 6, the SQE TEST SWITCH is an

ON or OFF user-selectable slide switch which is independent of the attached

MAU. This switch will also function in both local and remote mode of

operation.

You have the option to place the SQE Test slide switch either ON or OFF,

depending on your application. If ON, it means that the SQE Test is provided

to any DTE (or workstation) that is connected to one of the local eight

transceiver ports.

Status Indicators

The AT-810SL has LEDs to aid in installing, operating and troubleshooting

the fanout. These LEDs also serve to verify correct transceiver operation at a

glance. The following information is a description of their location, grouping

and functionality.



1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Allied Telesyn International Corp AT-810SL User Manual Page 30