Allied Telesyn International Corp AT-WA7500 Installation Guide download pdf (Page 28)

5. Attach the data cables to the switch ports. Do

not use a cross-over cable to connect

workstations or servers to ports 1 through 5.

Do not use a cross-over cable to connect

another switch or hub to the Uplink port.

Note

You can use either port 5 or the Uplink

port on an AT-FS705LE switch, but you

cannot use both simultaneously.

6. Go to the procedure “Verifying and

Troubleshooting the Installation” on page 16.

Installing the Unit on a Wall

For wall-mount installation, you can position

the switch vertically or horizontally on the wall

using the keyhole cutouts in the bottom of the

switch chassis.

1. If previously attached, remove the rubber feet

and all cables and the DC power cord from the

switch.

2. Select a wall location for the switch.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

No comments

Allied Telesyn International Corp AT-WA7500 Installation Guide Page 28