Allied Telesyn International Corp AT-WA7500 Installation Guide download pdf (Page 18)

The ports are IEEE802.3u Auto-Negotiation

compliant. This means that the ports can

automatically configure their speed and duplex

mode to match the capabilities of the end nodes

connected to the ports.

Port 5 and the Uplink Port

Port 5 and the Uplink port allow you to connect

an additional workstation to the switch or

interconnect the switch with another switch or

hub, without the use of a cross-over cable. If you

need to connect an additional workstation to

the switch, use Port 5, which is configured as

MDI-X, just like ports 1 through 4. If you need

to connect the switch to another Ethernet

switch, use the Uplink port, which is configured

as MDI.

Both Port 5 and the Uplink port offer 10 Mbps

or 100 Mbps performance and auto-negotiation

operation for both speed and duplex mode, just

like ports 1 through 4. Both ports feature an

RJ-45 connector and have a maximum

operating distance of 100 meters (328 feet)

using category 5 cable.

Note

You can use either port 5 or the Uplink

port. You cannot use both

simultaneously.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

No comments

Allied Telesyn International Corp AT-WA7500 Installation Guide Page 18