Allied Telesyn International Corp AT-WA7500 Installation Guide download pdf (Page 24)

Installation

Standalone Placement of the MR415T/MR815T

Both the MR415T and the MR815T can be standalone mounted.

When placing the unit horizontally, such as on top of a desk, use the rubber

feet.

Attach the four rubber feet provided with the unit to the underside of the

device in the four corners.

Figure 6 shows how the rubber feet are attached to an AT-MR415T.

Figure 6: AT-MR415T Horizontal Mounting

Connecting to a Network

1. Remove all equipment from the box. Store the box and packing materials

in a safe place in case the unit needs to be transferred in the future. It is

desirable to pack all equipment carefully in the box it was originally

shipped in.

2. Place the DC plug of the AC adapter into the DC Power Jack on the back of

the unit.

Note

Power to the hub must be sourced only from adapter in the package or

direct plug in type approved adapter rated 7.5Vdc, 500mA.

3. Plug the AC adapter plug into an electrical output of the appropriate

power. Check the front of the unit to make sure the green POWER lamp is

lit.



1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

No comments

Allied Telesyn International Corp AT-WA7500 Installation Guide Page 24