Installation
10
Table 1 shows the model variations and different power arrangements for
AT-MR415T/AT-MR815T Micro Repeaters:
Table 1: Model Configurations
UTP (RJ-45) Connectivity
A UTP cable with RJ-45 connectors is shown in Figure 5. For a 10Base-T link
between a repeater and a Medium Attachment Unit (MAU) or Network
Interface Controller (NIC), the cable is wired straight through.
Figure 5: RJ-45 Connector
10Base-T UTP cables can be up to 100 meters (328 ft.) in length. The cable
should be 22 to 26 AWG UTP wire with 100 Ω impedance. The AT-MR415T/
AT-MR815T Micro Repeater uses RJ-45 modular connectors for 10Base-T
connections.
Note
Do not connect standard telephone line into a signal connector.
Model Location Voltage
AT-MR415T-10 North America 90/120 VAC
AT-MR815T-10 North America 90/120 VAC
AT-MR415T-20 Europe/Asia 200/240 VAC
AT-MR815T-20 Europe/Asia 200/240 VAC
AT-MR415T-30 United Kingdom 200/240 VAC
AT-MR815T-30 United Kingdom 200/240 VAC
Comments to this Manuals